EWM AG WELDING GERMANY

Product Details:

Features: MIG/MAG inverter welding machine, pulse, with separate wire feeder. Perfect MIG/MAG weld seams even with long welding leads flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nuts. LED information bar: Indicates the current operating status.

Product Details:

Details:

• Universally applicable consistent welding results
• Precise and reproducible wire feed
• Maximum ease of operation
• Minimised finishing work for high-cost effectiveness

Product Details:

Titan XQ 400 puls compact, including all characteristics and welding processes. “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l. Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m.

Product Details:

■Perfect aluminium welding, even with thin sheets

■ Very good ignition characteristics

■ Excellent gap bridging, even with automated applications

■ Minimised heat input

■ Higher welding speed

■ Simple and safe handling of the arc for manual and automated welding

■ Well suited for additive welding with aluminium (3D welding)

■ Clean weld seams due to heavily reduced magnesium oxide

■ Lower welding fume emissions

■ Fast digital current regulation with EWM RCC technology (Rapid Current Control)

Product Details:

This MIG/MAG welder comes with a MIG/MAG torch which is water-cooled and 4 metres in length, it is also supplied with workpiece lead and pressure regulator. The Taurus 405 Basic S comes with transport cart which will transport the power source, cooling unit and gas cylinder.

Product Details:

Features:

MIG/MAG standard welding machines, step switch controlled, gas-cooled

4-roll drive. Equipped for 0.8 mm + 1.0 mm steel wires

5 m mains supply lead

Scope of supply includes welding machine only; other components such as wire feeder can be selected from accessories!

Product Details:

Features:

• Special set for gouging consisting of two Taurus 505 Basic
• Gouging with up to 13 mm carbon electrode (1000 A)
• Welding procedures and functions
• Suitable for MMA welding at no extra charge
• Suitable for GMAW welding of steel/CrNi/aluminium at no extra charge
• GMAW welding with separate drive 4 Basic wire feeder and Basic control possible
• High open circuit voltage for excellent ignition characteristics
• Trolly 39-1 trolley available for delivery
• Save electricity through standby function
• Protective earth monitoring (PE)

Product Details:

Features:

MIG/MAG standard welding machines, step switch controlled, gas-cooled

Mobile, compact, sturdy construction with small housing dimensions

2-roll drive, designed for 0.8 mm + 1.0 mm steel wires

Mira 151: 3.5 m mains supply lead with 16 A shock-proof plug

Product Details:

Features:

• Inverter welding machine with separate wire feeder, choice between drive 4X EX, drive 4X HP or drive 4X LP
• Welding procedures and functions
• Equipped at no extra charge with Synergic characteristics for GMAW welding of steel/CrNi/aluminium
• Suitable for MMA welding, TIG welding and gouging at no extra charge
• 16 individually configurable programmes for each welding task (JOB)
• Infinitely adjustable arc dynamics (choke effect)
• Adjustable start and end-crater functions
• Synergic or manual welding operation
• Gas-cooled or optionally water-cooled with cool 50 cooling unit
• High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires
• Equipped with 1.0–1.2 mm UNI rolls for low to high-alloy steel
• Energy-saving thanks to high efficiency and standby function
• Easy, tool-free change of welding polarity
• Earth fault monitoring (PE protection)
• IP23 spray water protected
• Connection capability for remote control and function torch
• Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
• PC interface for PC300 XQ software
• Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 5-litre water tank (cool50 cooling unit)
• Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

Product Details:

Features:

• Gas-cooled DC TIG inverter welding machine
• Multivolt (MV): Can be used worldwide thanks to automatic adjustment of mains voltage (115 V/230 V)
• Electronic HF start
• TIG lift arc welding without HF
• MMA pulse welding and pulsed TIG welding up to 2 kHz
• Non-latched/latched operation
• Reduced secondary current accessible using torch trigger
• Adjustable up-slope and down-slope time
• Adjustable gas pre- and post-flow time
• MMA welding
• Adjustable hot start current and hot start time
• Adjustable Arcforce
• Antistick function
• Energy-saving thanks to high efficiency and standby function
• Portable, including shoulder strap
• 3.5 m mains supply lead with 16 A shock-proof plug
• Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Product Details:

We are offering Brass Welding Machine to our clients. It's made in germany machine. with 5 year warranty( 3 year PCB and 5 year rectifier and transformer.) 

Additional Information:

• Item Code: ARC-200

Product Details:

Features:

MIG/MAG inverter welding machine, pulse, with separate wire feeder

Perfect MIG/MAG weld seams, even with long welding leads thanks to patented* Rapid Current Control technology (RCC)

flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nuts

LED information bar: Indicates the current operating status

Equipment as delivered: welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead

All-in – no extra charge:

With innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld

With Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium

Non Synergic operation for manual setting of welding parameters

Suitable for MMA welding, TIG welding and gouging

16 individually configurable programmes for each welding task (JOB)

Infinitely adjustable arc dynamics (choke effect)

Adjustable start and end-crater functions

High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires

Energy-saving thanks to high efficiency and standby function

Easy, tool-free change of welding polarity

Earth fault monitoring (PE protection)

IP23 spray water protected

Connection capability for remote control and PM function torch

Optional network connectivity with ewm Xnet software via LAN or WiFi gateway

PC interface for PC300 XQ software

Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

EP 1 563 938, EP 1 944 115, EP 0 743 126, EP 1 726 359, EP 1 640 100

Product Details:

Features:
MIG/MAG inverter welding machine, pulse, with separate wire feeder
Perfect MIG/MAG weld seams, even with long welding leads thanks to patented* Rapid Current Control technology (RCC)
flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nuts
LED information bar: Indicates the current operating status
Equipment as delivered: welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead
All-in – no extra charge:
With innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld
With Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium
Non Synergic operation for manual setting of welding parameters
Suitable for MMA welding, TIG welding and gouging
16 individually configurable programmes for each welding task (JOB)
Infinitely adjustable arc dynamics (choke effect)
Adjustable start and end-crater functions
High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires
Energy-saving thanks to high efficiency and standby function
Easy, tool-free change of welding polarity
Earth fault monitoring (PE protection)
IP23 spray water protected
Connection capability for remote control and PM function torch
Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
PC interface for PC300 XQ software
Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355
* EP 1 563 938, EP 1 944 115, EP 0 743 126, EP 1 726 359, EP 1 640 100

Product Details:

Features:

• Gas-cooled DC TIG inverter welding machine
• TIG welding
• Features characteristics for EWM activArc and EWM spotArc at no extra charge
• Electronic HF start
• TIG lift arc welding without HF
• TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification
• Adjustable pulse frequency and balance
• Non-latched/latched operation
• Reduced secondary current accessible using torch trigger
• Spot welding/tack function (spotArc/spotmatic)
• Adjustable up-slope and down-slope time
• Adjustable gas pre- and post-flow time
• MMA welding
• MMA average value pulsing
• Adjustable hot start current and hot start time
• Adjustable Arcforce
• Antistick function
• Highlights
• Energy-saving thanks to high efficiency and standby function
• Connection capability for remote control and function torch
• 3.5 m mains supply lead with 16 A shock-proof plug
• Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Product Details:

Fatures:

Modular AC/DC TIG inverter welding machine, gas- or water-cooled

Electronic HF start

TIG lift arc welding without HF

Adjustable AC waveform, sine, trapezoidal, square current

Adjustable AC frequency between 50 Hz and 200 Hz

Adjustable AC balance

TIG and MMA pulse function

Non-latched/latched operation

Reduced secondary current accessible using torch trigger

Adjustable up-slope and down-slope time

Adjustable gas pre- and post-flow time

MMA welding

Adjustable hot start current and hot start time

Adjustable Arcforce

Antistick function

Gas-cooled or optionally water-cooled with cool 40 U31 cooling unit

Energy-saving thanks to high efficiency and standby function

Portable, including shoulder strap

Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 trolleys available

3.5 m mains supply lead with 16 A shock-proof plug

Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Product Details:

Features:

• Modular AC/DC TIG inverter welding machine, gas- or water-cooled
• Comfort 2.0 control, simple operation with click wheel
• TIG welding
• Features characteristics for EWM activArc and EWM spotArc at no extra charge
• Electronic HF start
• TIG lift arc welding without HF
• Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate
• Adjustable AC waveform, sine, trapezoidal, square current
• Adjustable AC frequency between 50 Hz and 200 Hz
• Adjustable AC balance
• TIG automated pulsing with automatic specification of required pulse parameters
• Pulsed TIG welding in Hz and kHz range up to 15 kHz
• 100 free memory locations for recurring welding tasks (JOBs)
• Non-latched/latched operation
• Reduced secondary current accessible using torch trigger
• Spot welding/tack function (spotArc/spotmatic)
• Adjustable up-slope and down-slope time
• Adjustable gas pre- and post-flow time
• MMA welding
• MMA average value pulsing
• Adjustable hot start current and hot start time
• Antistick function
• Highlights
• Gas-cooled or optionally water-cooled with cool 40 U31 cooling unit
• Energy-saving thanks to high efficiency and standby function
• Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 4-litre water tank (cool 41U31 cooling unit)
• Connection capability for remote control and function torch
• Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 trolleys available
• 3.5 m mains lead with 16 A earthed plug
• Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Product Details:

Features:

Welding procedures and functions

GMAW pulsed welding and GMAW standard welding

Synergic characteristics for steel, CrNi and aluminium

MMA welding and TIG lift arc welding

Perfect for welding self-shielding flux cored wires

Infinitely adjustable arc dynamics (choke effect)

Synergic or manual welding operation

Non-latched/latched operation

Interval welding

Adjustable gas pre- and post-flow time

Portable, compact

Saves power through highly efficient performance

Robust casing suitable for construction site use

4-Rollen-Swissfeed-Antrieb. Ausgerüstet für 0,8 mm + 1,0 mm Stahldrähte

Easy, tool-free change of welding polarity

IP23 spray water protected

Wire spool diameter up to 200 mm/D200

3.5 m mains supply lead with 16 A shock-proof plug

Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Product Details:

Features:

• Inverter welding machine, DC
• Welding procedures and functions
• MMA and TIG lift arc welding
• Arcforce, hot start, antistick
• Portable, shoulder strap
• Your benefits
• Very light-weight  casing made of aluminium and impact-resistant plastic
• IP23 spray water protected
• 3.5 m mains lead with 16 A earthed plug
• Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Product Details:

Features:

Titan XQ 350 puls compact, including all characteristics and welding processes

MIG/MAG welding torch, water-cooled, 4 M

Coolant up to -10 °C (14 °F), 5 l,

Pressure regulator with manometer, 30 l

Gas hose, 2 m

Product Details:

Features:

MIG/MAG inverter welding machine, pulse, with separate wire feeder

Perfect MIG/MAG weld seams, even with long welding leads thanks to patented* Rapid Current Control technology (RCC)

flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nuts

LED information bar: Indicates the current operating status

Equipment as delivered: welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead

All-in – no extra charge:

With innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld

With Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium

Non Synergic operation for manual setting of welding parameters

Suitable for MMA welding, TIG welding and gouging

16 individually configurable programmes for each welding task (JOB)

Infinitely adjustable arc dynamics (choke effect)

Adjustable start and end-crater functions

High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires

Energy-saving thanks to high efficiency and standby function

Easy, tool-free change of welding polarity

Earth fault monitoring (PE protection)

IP23 spray water protected

Connection capability for remote control and PM function torch

Optional network connectivity with ewm Xnet software via LAN or WiFi gateway

PC interface for PC300 XQ software

Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

EP 1 563 938, EP 1 944 115, EP 0 743 126, EP 1 726 359, EP 1 640 100